20 TOP Assistant Architecture Multiple Choice Questions and Answers

List of top 20 most frequently asked assistant architecture multiple choice questions and answers pdf download free

Assistant Architecture Multiple Choice Questions and Answers List

  1. perpendicular offset form the junction of transition curve and curricular curve to the tangent is equal to
  2. If the radius of circular curve is five times the length of the transition curve, then the spiral angle is given by
  3. If an upgrade of 1-5% is followed by a downgrade of 0.5% and rate of change of grade is 0.2% per 20m chain, then the length of vertical is
  4. By plane table surveying
  5. The plots intended for residential purposes in a municipal area should not be less than
  6. The plot size in residential layouts in corporation limits for row housing in m2 is
  7. In the double application of principle of reversion, the apparent error is
  8. The maximum value of centrifugal ratio on roads and railways respectively are taken as
  9. Agonic line is the line joining points having
  10. The difference in elevation of points between a vertical and a tangent is
  11. The type of pointing in which the mortar is first pressed into the raked joints and then finished off flush with the edges of the bricks or stones, is called
  12. A block of stone or concrete provided under the end of tie beam to spread the load from the roof over a large area of bearing, is called
  13. The horizontal members of wood or steel used to support the common rafter of a sloping roof, are called
  14. The type of pointing in which the mortar is first pressed into the raked joint and then finished off flush with the face of the bricks or stones is called
  15. The efficiency of a riveted joint is :
  16. The efficiency of pile group is _____.
  17. Read the following two statements and select the correct answer.
  18. A curve tangential to four straight lines and consisting of arcs of different radii is known as _____.
  19. for the computation of areas, which rule is most accurate?
  20. If the degree of a curve is 10, then radius of the curve is equal to _____.

Like This Page...Share on FacebookTweet about this on TwitterPin on PinterestShare on Google+Share on LinkedInShare on RedditShare on StumbleUponShare on TumblrBuffer this pageDigg thisEmail this to someone
This entry was posted in Multiple Choice Questions. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *