30 TOP DHCP Server Multiple Choice Questions and Answers

List of top 30 most frequently asked dhcp server multiple choice questions and answers pdf download free

DHCP Server Multiple Choice Questions and Answers List

  1. What is the purpose of the DHCP server?
  2. How is the message sent from a PC2 when is first powers on and attempts to contact the DHCP Server?
  3. What is the default behavior of R1 when PC1 requests service from DHCP server?
  4. Refer to the exhibit. Which rule does the DHCP server use when there is an IP address conflict?
  5. How does a DHCP server dynamically assign IP address to host?
  6. Which two tasks does the Dynamic Host Configuration Protocol perform?
  7. Which statement is correct regarding the operation of DHCP?
  8. Which statements are true about the DHCP quarantine method?
  9. A ProCurve 3500yl switch is connected to port 1 of a ProCurve NAC 800 and a DHCP server is connected to port 2. The DHCP server IP address is 10.1.10.10/24. The NAC 800 IP address is 10.1.10.20/24. The IP address 10.1.24.1/24 is assigned to VLAN 24 on the switch.
    Which additional configuration settings would be appropriate for supporting a 10.1.24.0/24 non-quarantine subnet and a 10.1.25.0/24 quarantine subnet?
  10. Which configuration task is applicable to the ProCurve NAC 800 inline quarantine method?
  11. What is an important factor to consider when deploying the ProCurve NAC 800 using the DHCP quarantine method?
  12. A network is configured to support a ProCurve NAC 800 operating with the DHCP quarantine method. How does an endpoint transition from a quarantine IP address to a non-quarantine IP address after passing integrity testing?
  13. A network is configured to support a ProCurve NAC 800 operating with the DHCP quarantine method. The NAC 800 is located between a ProCurve 3500yl switch and a DHCP server. How is DHCP traffic processed when an endpoint, that is currently unknown to the NAC 800, sends a DHCP request for an IP address?
  14. A ProCurve 5406zl switch is connected to port 1 of a ProCurve NAC 800 and a DHCP server is connected to port 2 of the NAC 800. You are planning to deploy the ProCurve NAC 800 with the DHCP quarantine method using a shared subnet approach. Which configuration requirement must be satisfied?
  15. You are configuring a ProCurve NAC 800 to operate using the DHCP quarantine method. Which parameters are specified when adding a quarantine area?
  16. _____ Sets an alias for a host name
  17. 10.0.0.0 255.0.0.0 (Assignable IP range – 10.0.0.1-10.255.255.254) is
  18. _______ : Declares the host that’s the most authoritative for the zone and, as such, is the best source of DNS information for the zone.
  19. which is the type of DNS Scopes
  20. _____. Is the process of placing timestamps on dynamically registered records
  21. which IP range is 69.254.0.1 to 169.254.255.254 / 255.255.0.0
  22. _________ indicates that the DHCP server is authorized and active
  23. _______ DNS tab to perform basic tests of name resolution
  24. Connection Oriented Protocol for end-to-end communication is called
  25. DHCP audit logs are stored in ________
  26. DHCP ____ occur every 60 minutes
  27. DHCP servers dynamically update ____________ on behalf of clients using secure updates
  28. ________ DNS tab for detailed troubleshooting
  29. ______ interval is the period after the no-refresh interval during which the timestamp can be refreshed.
  30. ______ interval is the period after the timestamp is set that must elapse before refresh can occur.

This entry was posted in Multiple Choice Questions. Bookmark the permalink.

Leave a Reply

Your email address will not be published. Required fields are marked *